- The use and placement of cribs
- date： 2019-3-29 hits： 1809
- 1. Tight connection
First of all, the connection between each bed plate hole spacing to be smaller. This is conducive to rapid assembly, improve efficiency, convenient operation.
It is also a standard for judging the quality of crib workmanship.
2. Layout requirements
Crib had better not be close to windowsill or central heating, had better also do not install a few impervious light, impervious bed shade. And to prevent the baby falling between the bed and the wall, parents should put the head of the bed against the wall. If the bed along the direction of the wall, it is best not to let the bed and the wall have space.
3. The bearing
Generally speaking, the bearing force of crib bedplate wants prep above 30 kilograms, the connection of bedplate must be firm and solid all the more. Crib had better use the banding bedplate that the plank with qualitative iron, real wood makes will make bedplate, join means had better choose embedded, pensile type is ok also.
4. Bedside distance
The inner height of the crib should be more than 30 cm. In particular, if the bed board is placed on the top, the length from the top of the bed board to the edge of the bed should be more than 20 cm. If the bed board in the lowest place, the top of the bed board from the guardrail, the length of the head of the bed to be more than 50 cm, so as not to baby will fall out of the crib.
Fence clearance
Fences are best spaced between five and six centimeters. The gap between the fence should be between 5.2cm and 5.8cm. If it's too big, the baby will stick his head out.
6. Bed height adjustment (multi-stage or 3-stage)
After the baby grows the size of the crib does not suit him, so as the baby's height to adjust the length of the crib. - previous：Buy real wood children eat cha
next：Mattess prevents dust mite, ba - back
Online Service
Free Hotline
